Tufting  Academy

    Beginner
    Your Tufting Start Guide
    Tufting Techniques

  H1

Tufting Frame

 Overview
Installation
Operation

Operation
Frame Setup
Fabric Setup
How to Open the leaf springs
Fabric Tensioning Operation
Fabric Removal
Fabric Extension

---

Anncouncement
For full assembly and operation details, please refer to here.


We’re continuously upgrading our products! Please note there are a few versions available. Most operations and assembly instructions are similar. Don’t worry if your product looks different from the video. 

Fabric Setup

---

Attach the fabric edges to the velcro on the rod (ensuring it is applied smoothly), then rotate the rod clockwise to wrap the fabric around it. Gently press the ends of the rolled fabric rods into the slots.

Place the rod with the rolled fabric into the slot. Gently press down on both ends to secure it in the groove.



Rotate the upper knob until the curved surface faces down and the curved rod is at the back. 




Turn the lower knob so the movable rod points forward.







Pull the left and right handles upward to the highest point.

Tips: Hold one side with your hand to apply force more easily, making it simpler to pull the handle to its highest position.



Pull the fabric off the rod and thread the edges through the gaps between the top and bottom crossbars, making sure about 7 cm hangs over the bottom.








Open the left and right fabric-clamping leaf springs.